Here are some pictures of my work in progress Parallelogram.
I've chosen some mahogany for the 4 main parallel arms for strength , the centre vertical post is temporary an only serves to hold the mount in a vice, as is the swinging arm at the end of the mount which will hold the binoculars.
When some decent hardwood is sourced i will remake these parts.
As you can see the movement is perfectly parallel when raised.
The total length of the mount from counter weight end to the other is about 1 metre.
The swinging arm add's another 6 or 7 inches.
Note also that all the bolts are just DIY store cheapo's, ill try to get some nice chromed ones for the finished mount.
A close up of the swinging arm and how ive offset the binocular bracket to balance them.
As this pictures is viewed is if you were looking into the objectives of the bino's.
This part works so well i think i will transfer it over to the finished version.
Ive also made 3 more positions for the bracket should i want to use heavier binoculars in the future.
1 comment:
I thought that you might be interested in our new astronomy forum at www.insideastronomy.com.
We are a friendly enthusiastic group of amateur astronomers sharing in our passion for astronomy, given frank and honest help & advise in constructive manner to our members. The forum as been live now of a couple of months and we need motivated astronomers such as your to join up to help build the community.
I hope that you can find the time to checkout the forum and post some content and images.
Best regards
Neil.
Post a Comment